
( Brand: Cpi ), ( Model: CP-300 ), ( Part Type: Supply Speaker Radio ), ( Compatible Product: Cb Radio ), ( Compatible Brand: Universal ), ( Country/region Of Manufacture: United States )
If you don't have a radio with the matching plug, could always cut it off just wire your power cable external speaker to appropriate wires. The red black leads are for power.
Also one thing on note is that the upper wing left hand side of supply either got chipped or was purposely cut out, perhaps for a microphone connector to fit there. I know this unit was made to match up with the Cpi 400 radio possibly other radios. I then tested the speaker by using clip leads to hook it up works fine as well wings on top bottom of supply can be removed, but if you leave them, easily set your radio have a convenient all in one configuration priority, insured.
The case wings do have some scratch marks, but nothing out of ordinary for its age. As you can see in the pictures, it was able to handle radio transmit with no problem that using clip leads power. Hopefully, someone can get some good use from this supply, especially if you are a Cpi collector or have the radios that unit was specifically made for. Apparently this supply is very rare, as I have looked all over the internet haven't seen any of these units listed.
When I checked the supply voltage it actually showed right at 14vdc, no load. This offer is for the supply only, there no radio or watt meter included grey green leads are speaker. This item came from an estate sale.
There is a plug on the end of power cable. Outside the us, contact me for shipping info. The radio watt meter shown in pictures were for demo only.